COMING SOON
- Reinforced with fibers
- Recommended for tiles up to 120 cm long
- For balconies, terraces and swimming pools
- Suitable for covering ceramic facades
FEATURES AND BENEFITS
Cement based tile adhesive with synthetic fibers, elastic, with improved adhesive strength, very high quality and very elastic, and with high correction time, for large tiles and for critical surfaces. It is distinguished by a very good workability, and resistance to moisture and frost.
PROPERTIES
- Recommended for tiles up to 120 cm long
- For balconies, terraces and swimming pools
- For indoor and outdoor use
- C2TES1 adhesive according to the EN 12004 standard
- Suitable for covering ceramic facades
- High flexibility
- Suitable for underfloor heating systems
- Resistant to different atmospheric conditions
- Reinforced with fibers
DESCRIPTION
V-44 Super Flexible is composed of high quality cement, quartz sand, mineral powder filler and other additives.
HOW TO USE
SUBSTRATE PREPARATION FOR V-44 Super Flexible
The surface where the V-44 Super Flexible adhesive will be applied must be cleaned of impurities from various wastes, grease, and oils and depending on the surface, a primer can be applied.The surface must not be wet. The surface where the adhesive will be applied must be level.
MIXING OF V-44 Super Flexible
Pour the amount of 25 kg of adhesive into a container where it is previously poured fresh water in the right amount. After putting them in a container with a mixer, mix until a homogeneous mass is obtained. Let it rest for 10 minutes and mix it again. The workability time of the mixture is 2-4 hours. The surface where it will be applied must be free of dust and grease.
APPLICATION OF V-44 Super Flexible
Apply the adhesive with a suitable trowel and spread it evenly with a notched steel trowel. It is recommended to work in suitable atmospheric conditions at temperatures from +5˚C to +35˚C. For indoors use, the surface coverage on the back side of the tile must be no less than 70%. The grout line filler is applied when the adhesive has completely dried.
RELATED PRODUCTS
V22 – Cement based tile adhesive, elastic, with improved adhesive strength, for stoneware tiles and ceramic tiles. It is distinguished by a very good workability, and resistance to moisture and frost.
V33 – Cement based tile adhesive with synthetic resin, elastic, with improved adhesive strength, and with high correction time, for stoneware tiles, ceramic tiles, and porcelain tiles. It is distinguished by a very good workability, and resistance to moisture and frost.
V11- Cement based tile adhesive, with normal adhesive strength, for stoneware tiles and ceramic tiles. It is distinguished by a very good workability, and resistance to moisture.
