- Recommended for tiles up to 60 cm long
- Suitable for underfloor heating systems
- Slip resistance
FEATURES AND BENEFITS
Cement based tile adhesive, elastic, with improved adhesive strength, or stoneware tiles and ceramic tiles. It is distinguished by a very good workability, and resistance to moisture and frost.
PROPERTIES
- Recommended for tiles up to 60 cm long
- For stoneware and ceramic tiles
- For indoor and outdoor use
- C2T adhesive according to the EN 12004 standard
- Resistant to water and frost
- Slip resistance
- Suitable for underfloor heating systems
DESCRIPTION
V-22 Elastic is composed of high-quality cement, quartz sand, mineral powder filler and other additives.
HOW TO USE
SUBSTRATE PREPARATION FOR V-22 elastic
V-22 Elastic is applied to all solid surfaces.The surface where the V-22 Elastic adhesive will be applied must be cleaned of impurities from various wastes, grease, and oils and depending on the surface, a primer can be applied.The surface must not be wet. The surface where the adhesive will be applied must be level.
MIXING OF V-22 elastic
Pour the amount of 25 kg of adhesive into a container where it is previously poured fresh water in the right amount. After putting them in a container with a mixer, mix until a homogeneous mass is obtained. Let it rest for 5 minutes and mix it again. The surface where it will be applied must be free of dust and grease.
APPLICATION OF V-22 elastic
Apply the adhesive with a suitable trowel and spread it evenly with a notched steel trowel. It is recommended to work in suitable atmospheric conditions at temperatures from +5˚C to +35˚C. The grout line filler is applied when the adhesive has completely dried. For indoors use, the surface coverage on the back side of the tile must be no less than 70%.
RELATED PRODUCTS
V44 – Cement based tile adhesive, elastic, with improved adhesive strength, for stoneware tiles and ceramic tiles. It is distinguished by a very good workability, and resistance to moisture and frost.
V33 – Cement based tile adhesive with synthetic resin, elastic, with improved adhesive strength, and with high correction time, for stoneware tiles, ceramic tiles, and porcelain tiles. It is distinguished by a very good workability, and resistance to moisture and frost.
V11- Cement based tile adhesive, with normal adhesive strength, for stoneware tiles and ceramic tiles. It is distinguished by a very good workability, and resistance to moisture.
